A new house is not a low-radon house, and in Wisconsin it is not required to be built as one. If you are building in the Fox Valley or around Green Bay, radon is something you have to ask for.
Wisconsin requires nothing
There is no statewide requirement for radon-resistant construction in Wisconsin, and no local one in any county here either. DHS's own page on radon-resistant construction names no Wisconsin city, village or county that requires it [1].
It came close to changing. In the 2019 session, Assembly Bill 828 would have directed the state to require radon-resistant materials and techniques in new one- and two-family dwellings, along with public buildings, places of employment and modular homes. It was introduced on January 30, 2020, referred to the Committee on Housing and Real Estate, and failed to pass on April 1, 2020 without reaching a floor vote [2].
So the practical position for a build here is that radon features are an option on your specification, not a line in the code. If you do not raise it, you will probably not get it — and a newly finished house in an area where half of recorded tests exceed the action level [3] is as likely to need a retrofit as an old one.
What radon-resistant construction actually is
EPA's five features, as DHS sets them out [1]:
- A 4-inch layer of clean, coarse gravel beneath the slab, so soil gas can move freely to one collection point rather than seeping up across the whole floor.
- Heavy plastic sheeting, 6 mil polyethylene, or a vapour retarder laid over the gravel.
- A 3- or 4-inch solid PVC Schedule 40 vent pipe running from the gravel layer up through the roof, labelled "Radon System".
- Polyurethane caulk sealing all foundation openings, cracks and the slab perimeter.
- An electrical junction box in the attic, so a fan can be fitted later if a test shows one is needed.
That is a passive system: no fan, relying on warm air rising in the stack. It is cheap at the framing stage and awkward afterwards, which is the whole argument for doing it during construction.
DHS also recommends testing the finished house, and says that if levels are elevated a fan can be added to the stack in the attic — but not in conditioned space such as the basement [1].
What it costs, and what it saves
DHS puts a passive system at 50% to 70% of the cost of a retrofitted mitigation system, and gives about $1,200 as the retrofit figure [1]. Its general figure for a contractor-installed mitigation system is $1,000 to $2,000 [4].
The return is the striking part. DHS cites an EPA cost-benefit analysis from December 2025 estimating up to $53 returned per dollar for new homes built with radon-reducing features, against up to $15 per dollar for mitigating an existing home above the action level [4]. EPA's builder guidance makes the same point from the other direction: fixing a radon problem found after move-in can cost the owner considerably more than building the features in [5].
National price ranges for passive systems run $500 to $2,500 (Angi) [6]. The fuller picture is on radon mitigation cost.
What to ask your builder
- Ask for it explicitly, in writing, in the specification. Nothing obliges a Wisconsin builder to include it.
- Ask which of the five features are included. "Radon ready" sometimes means a stub of pipe and nothing else. The gravel layer and the sealed membrane are the parts that make the pipe work.
- Ask where the stack runs. Through the roof, not out a wall at ground level, and not terminating near a window.
- Ask for the attic junction box, even if no fan is planned. It is the cheapest item on the list and the one that makes a later upgrade simple.
- Ask who tests the finished house, and when. Wisconsin requires no test, so it needs to be someone's named responsibility. Test after the house is closed up and conditioned, not mid-build.
- Ask what happens if it tests above 4.0 pCi/L. Agree in advance who pays for the fan.
If a builder tells you Wisconsin code requires radon features, that is wrong, and worth checking what else you have been told. DHS's page is the reference [1].
Buying a newly built house
Same questions, asked of the seller or developer, plus a test of your own. Wisconsin requires no radon test for a real estate transaction, though DHS calls it highly recommended [7]. See radon in a home sale.
If a new house tests high
Request a quote with the result. If there is a passive stack already in place, say so — adding a fan to an existing pipe is a much smaller job than a full retrofit.
We're a referral service, not a contractor. Wisconsin doesn't license or certify radon contractors, so we pass your request to independent contractors without checking their credentials, a referral is not an endorsement, and they may pay us for referrals.
Sources
- Wisconsin DHS, Radon: Resistant Construction (page last revised Oct 22, 2026). https://www.dhs.wisconsin.gov/radon/radon-resistant-const.htm
- Wisconsin Legislature, 2019 Assembly Bill 828 (radon-resistant construction), bill history: failed to pass pursuant to Senate Joint Resolution 1, April 1, 2020. https://docs.legis.wisconsin.gov/2019/proposals/ab828
- Wisconsin DHS, Radon Map: over 100,000 Wisconsin indoor radon test results, 1995-2016, aggregated by ZIP code (DHS_GIS feature service, queried Nov 18, 2026). https://wi-dhs.maps.arcgis.com/apps/webappviewer/index.html?id=68f3a3e068854810b626d002ce47aff4
- Wisconsin DHS, Radon: Mitigation (fetched Nov 18, 2026). https://www.dhs.wisconsin.gov/radon/reduce-radon.htm
- U.S. EPA, Radon-Resistant Construction Basics and Techniques, last updated Aug 6, 2026. https://www.epa.gov/radon/radon-resistant-construction-basics-and-techniques
- Angi, "How Much Does a Radon Mitigation System Cost? [2026 Data]," Mitchell Grant, updated Sep 28, 2026. https://www.angi.com/articles/how-much-does-it-cost-remove-radon-gas.htm
- Wisconsin DHS, Radon Information for Wisconsin (page last revised Oct 21, 2026). https://www.dhs.wisconsin.gov/radon/index.htm