Wisconsin has better public radon data than most states, and it is routinely misquoted. This page sets out what the figures are, what they mean, and what they cannot tell you about your own house.
The statewide picture
Wisconsin DHS estimates that about 1 out of 10 homes in Wisconsin has high radon levels [1]. That is the only statewide prevalence figure DHS publishes; it does not publish a statewide average reading. The action level DHS uses is EPA's: above 4.0 pCi/L, hire a certified contractor [2].
EPA also publishes a Map of Radon Zones that rates counties by predicted potential. We don't quote a zone for the counties here, because EPA's own Wisconsin map is an image-only document we could not read as text, and the sites that reproduce it are not primary sources. It matters less than it sounds: EPA says the map should not be used to determine if individual homes need to be tested, and its advice is that no matter where you live, test your home for radon [3]. The measured tests below are better evidence anyway.
The local data, ZIP by ZIP
DHS publishes a map of more than 100,000 indoor radon tests taken across Wisconsin between 1995 and 2016, aggregated to ZIP code [4]. The towns this site covers account for more than 12,500 of them. For the towns with a ZIP of their own:
| Town | ZIPs | Tests | At or above 4.0 |
|---|---|---|---|
| Wrightstown | 54180 | 64 | 70.3% |
| Kimberly | 54136 | 140 | 62.9% |
| Greenville | 54942 | 358 | 58.4% |
| Hortonville | 54944 | 249 | 57.4% |
| Kaukauna | 54130 | 491 | 54.6% |
| Neenah | 54956 | 1,948 | 54.1% |
| Little Chute | 54140 | 188 | 54.3% |
| Combined Locks | 54113 | 89 | 52.8% |
| Menasha | 54952 | 1,073 | 51.9% |
| De Pere | 54115 | 896 | 50.6% |
| Omro | 54963 | 135 | 50.4% |
| Sherwood | 54169 | 59 | 47.5% |
| Winneconne | 54986 | 100 | 45.0% |
| Pulaski | 54162 | 57 | 43.9% |
| Suamico | 54173 | 35 | 20.0% |
Appleton spans four ZIPs (54911, 54913, 54914 and 54915) holding 2,741 tests, from 46.5% to 53.8% [4]. Green Bay spans six, holding 1,565 tests, from 40.4% in 54302 to 56.5% in 54311 [4]. Oshkosh spans three, holding 1,336, from 49.2% to 56.2% [4]. Fond du Lac spans two, holding 1,041, and they differ sharply: 43.1% in 54935 against 56.1% in 54937 [4].
Two readings worth knowing about
One test in Oshkosh's 54901 came back at 408 pCi/L, more than a hundred times the action level and the highest single reading anywhere in the area this site covers [4]. Another, in Appleton's 54915, reached 213.9 [4].
Neither says anything about the house next door. They are two results among more than twelve thousand, spread over two decades. What they do show is how high levels in this part of Wisconsin can go when they go wrong.
Why neighbouring ZIP codes disagree
The sharpest illustration in the data sits around Hobart. The village has no ZIP of its own and its addresses fall in two: 54313, where 52.8% of 508 tests were at or above the action level, and 54155, where 26.8% of 168 were [4]. Two adjoining areas, a 26-point gap.
That gap is the argument against drawing conclusions from ZIP figures. If radon varies that much between neighbouring ZIP codes, it varies between neighbouring houses too — which is exactly what the mitigation trade finds in practice.
Four things the figures cannot do
These caveats are DHS's own, and they matter because contractor websites routinely drop them.
- They are not a survey. The readings come from tests people chose to buy. Someone who suspects a problem is likelier to test, which pushes the percentages up relative to the housing stock as a whole.
- They describe ZIPs, not towns. DHS aggregates to ZIP code boundaries, and says residences inside the ZIP but outside the municipal boundary are included [4]. Nine of the towns on this site — Allouez, Ashwaubenon, Bellevue, Fox Crossing, Freedom, Grand Chute, Harrison, Hobart and Howard — have no ZIP of their own at all.
- They are old. The tests run from 1995 to 2016. Nothing in the dataset is more recent than a decade ago.
- Small samples move easily. Wrightstown's 70.3% rests on 64 tests and Suamico's 20.0% on 35. A handful of results either way would move both by ten points or more.
So when you see a share of tests quoted as a share of homes on a mitigation company's site, it is this dataset with the sample size, the date and the ZIP-versus-town distinction stripped out.
What Wisconsin requires about any of this
Very little. No testing is required to sell a house, though DHS calls it highly recommended [1]. No Wisconsin jurisdiction requires radon-resistant construction in new homes [5]. And the state does not license or certify the contractors who do the work [6], which is why choosing a radon contractor is a page on this site at all.
Get a quote
Send a request with your town and any test result, and we'll pass it to an independent contractor working in your area.
We're a referral service, not a contractor. Wisconsin doesn't license or certify radon contractors, so we pass your request to independent contractors without checking their credentials, a referral is not an endorsement, and they may pay us for referrals.
Sources
- Wisconsin DHS, Radon Information for Wisconsin (page last revised Oct 21, 2026). https://www.dhs.wisconsin.gov/radon/index.htm
- Wisconsin DHS, Radon: Mitigation (fetched Nov 18, 2026). https://www.dhs.wisconsin.gov/radon/reduce-radon.htm
- U.S. EPA, EPA Map of Radon Zones, last updated Aug 17, 2026. https://www.epa.gov/radon/epa-map-radon-zones
- Wisconsin DHS, Radon Map: over 100,000 Wisconsin indoor radon test results, 1995-2016, aggregated by ZIP code (DHS_GIS feature service, queried Nov 18, 2026). https://wi-dhs.maps.arcgis.com/apps/webappviewer/index.html?id=68f3a3e068854810b626d002ce47aff4
- Wisconsin DHS, Radon: Resistant Construction (page last revised Oct 22, 2026). https://www.dhs.wisconsin.gov/radon/radon-resistant-const.htm
- Wisconsin DHS, Radon: How to find a contractor (page last revised Oct 7, 2026). https://www.dhs.wisconsin.gov/radon/proficiency.htm